Roof Square Footage Calculator

Measure the roof from the ground: enter the footprint with the overhangs and the pitch, and get the roof area, squares and bundles.

Sizes
  1. Area—

Total area

—sq ft

Sq meters
—
Sq yards
—
Acres
—
Sq inches
—
Your areas aredrawn here, to scale

Roofing: what to buy

  • Roof surface (6/12 pitch)— sq ft
  • Roofing squares (incl. 10% waste)— squares
  • Shingle bundles— bundles

Type the measurements. The total and the sketch update as you type.

Roofing options, waste and cost

Short answer: Multiply the roof’s footprint, including the overhangs, by the pitch factor: 1.054 for a 4/12 roof, 1.118 for 6/12, 1.202 for 8/12 and 1.414 for 12/12. Divide by 100 for roofing squares. A 1,500 sq ft footprint at 6/12 is about 1,677 sq ft of roof; with 10% waste that is 18.4 squares, or 56 bundles at 3 bundles per square.

Roof pitch factors

The pitch is how many inches the roof rises for every 12 inches it runs. The factor is √(1 + (rise ÷ 12)²): it turns the flat footprint into the sloped surface.

PitchFactorRoof area for a 1,000 sq ft footprintSquares (no waste)
2/121.0141,014 sq ft10.1
3/121.0311,031 sq ft10.3
4/121.0541,054 sq ft10.5
5/121.0831,083 sq ft10.8
6/121.1181,118 sq ft11.2
7/121.1581,158 sq ft11.6
8/121.2021,202 sq ft12
9/121.251,250 sq ft12.5
10/121.3021,302 sq ft13
12/121.4141,414 sq ft14.1

How to measure

  1. Measure the outline of the house on the ground and add the overhang on every side (eaves and rakes). Plans or a survey work too. Do not climb on the roof to measure.
  2. Find the pitch: hold a level 12 inches long against a rafter or the roof edge and measure how far the roof rises over it, or check the plans.
  3. Different pitches (a porch roof, for example) go in as separate areas; run the calculator once per pitch.

Squares, bundles and waste

A roofing square is 100 sq ft of roof. Most standard 3-tab and many architectural shingles come 3 bundles to a square, but heavier designer shingles can need 4 or 5: the wrapper says. Add about 10% waste for a simple gable roof and 15% or more for hips, valleys and dormers. Starter strip and ridge caps are extra.

Frequently asked questions

How many square feet are in a roofing square?

100 square feet of roof surface.

How many bundles of shingles are in a square?

Usually 3 for standard 3-tab and many architectural shingles, so one bundle covers about 33.3 sq ft. Some heavy shingles need 4 or 5 bundles per square.

How do I find my roof pitch?

Measure how many inches the roof rises over 12 inches of horizontal run, with a level and a tape measure, or read it on the plans.

Is roof square footage the same as house square footage?

No. The roof includes the overhangs and is larger than the footprint because it slopes: about 12% larger at a 6/12 pitch.

Related calculators

Updated . Every formula, constant and source: methodology.